How should the appropriate dilution ratio of qinghua liquid cleaning agent be determined according to the severity of the stain and the material of the cleaning object when using it?
Publish Time: 2024-12-11
When using qinghua liquid cleaning agent, the appropriate dilution ratio is crucial to ensure the cleaning effect and protect the cleaning object. The determination of this ratio requires a comprehensive consideration of the severity of the stain and the material characteristics of the cleaning object.When facing slight UV stains, such as only a small amount of UV curing glue residue or slight UV ink contamination on the surface, and the cleaning object is a material with strong corrosion resistance such as glass, a higher dilution ratio can be used. Generally speaking, the cleaning agent and water can be diluted at a ratio of 1:5 to 1:10. Such a dilution ratio can not only effectively remove stains, but also save the amount of cleaning agent to the greatest extent and reduce costs. Because the cleaning ability required for slight stains is relatively weak, a higher dilution ratio is sufficient to meet the cleaning needs, and the glass material can withstand this milder cleaning solution concentration without adverse effects.For moderate stains, such as when the UV stain covers a large area or is thick, if the cleaning object is made of plastic, the dilution ratio needs to be appropriately reduced. The cleaning agent can be mixed with water in a ratio of about 1:3 to 1:5. Plastic materials are more sensitive than glass, and too high a concentration of cleaning agent may cause problems such as fogging, discoloration, or even deformation on the plastic surface. At this time, a moderate dilution ratio can ensure sufficient decontamination ability to deal with moderate stains and ensure the safety of plastic materials.In the case of severe stains, such as a large amount of stubborn UV-cured glue accumulated on the metal surface, since metal materials usually have good corrosion resistance, in order to achieve the purpose of thorough cleaning, the dilution ratio should be further reduced and can be adjusted to 1:1 to 1:3. In this way, the relatively high concentration of cleaning liquid can give full play to its decontamination efficiency and decompose and remove stubborn stains. However, during use, it is still necessary to pay close attention to the reaction of the metal surface to avoid long-term immersion causing rust or other damage to the metal.In short, determining the dilution ratio of qinghua liquid cleaning agent requires users to carefully evaluate the severity of the stains and the material of the cleaning object, and through continuous trial and summarization of experience, find the best dilution ratio that can both efficiently clean the stains and protect the cleaning object, so as to achieve the ideal cleaning effect and extend the service life of the cleaning object.
